Search Results

First, we need to make sure all the supplies are ready to give this workshop. Included in the list below are all pieces that should be included in the workshop kit and brought to this workshop. In previous years enough kits were put together in expectation tha...

This workshop is very similar to the ECAD Level 1 Workshop but relies on a different library and schematic reference to build the Stoplight PCB. This is important because students are then expected to assemble their own Stoplight PCB in the assembly workshop. ...

The final workshop of this series is the stoplight PCB assembly. This workshop takes a lot of preparation to ensure all components and assembly bags are ready to go on the day of the workshop.  Preparation  1) Assembly bags will need to be made for each stud...

Overview The seeed studio ESP32-S3 is a small Wi-Fi and Bluetooth enabled microcontroller that is about the size of a thumbprint!  To get started   seeed studio has good documentation to get you up and running: https://wiki.seeedstudio.com/xiao_esp32s3_...

Overview Vernier is a company that makes plug-and-play sensors for hands-on science education. We supply many Vernier sensors to BMEN classes for their labs, and students (outside of BMEN) are welcome to check out sensors directly from the Electronics Center...

This is a nice link: link Type T thermocouples (Cu/constantan or blue/red) have an accuracy of $/pm$ 1 degree C, whereas Type K thermocouples have an accuracy of $/pm$ 2.2C. 

While Altium designer allows you to import and export design rules (in .RUL format), KiCad uses a different approach for managing design constraints. KiCad does not currently provide a dedicated rule import/export system equivalent to that of Altium. Instead, ...

Overview PIR or Passive Infrared Sensors are commonly used in projects where students want a device capable of motion detection. These sensors detect movement by measuring changes in infrared radiation emitted by warm objects, such as people or animals, withi...

Find a program to help you design, analyze, or scale your project. Most open-source software is publicly available, while other programs may be licensed through the university or may require an ITLL account. Contact the IT department for any software-related ...

The ITLP SolidWorks Guide provides licensing, installation, troubleshooting, and support information for students and faculty using SolidWorks through the University of Colorado Boulder. Before Getting Started SolidWorks is always available for CEAS affili...

ITL Laboratory Hours and Access Effective Thursday, August 20, 2026 ITLL Public Building Hours Days Hours Monday – Friday 8:00 AM – 5:30 PM Extended Buff OneCard Access Access with Completion of the ITLL In-Person Orientation To...

Contact Information Integrated Teaching & Learning Program (ITLP) Email: itlp@colorado.edu Phone: 303-492-7222 Website: https://itlp.colorado.edu/ For general questions or assistance, ITLP recommends contacting the main office rather than individu...

Overview Ultrasonic Sensors are a common form of proximity and distance sensors used in a wide variety of different projects. These sensors feature both an emitter (trigger) which releases an ultrasonic sound wave, and a receiver (echo) which reads the ultras...

If you have any questions about our classrooms, equipment, or furniture, please do not hesitate to reach out to itlp-scheduling@colorado.edu.  DLC 150 [Launching SP27] Classroom Properties Capacity (Student Seating): 42 Capacity (CA...

Key People for Support:  Lia Cucuzzella, Laser Cutting Engineer - Project Depot  Sa'Von Thompson, Laser Cutting Technician - ITLL 1B12 Engineering Support Student Staff - LaunchPoint How many Laser Cutters are at the ITLL, and what types are they? We oper...