Baileigh DP-1250VS-HS Drill Press
1. General Info
Purpose:
Designed for high-speed, variable-speed drilling in metal and compatible materials. Ideal for industrial fabrication, maintenance, and precision drilling tasks. Features include digital RPM readout, MT3/MT4 spindle taper, and adjustable table height.
Baileigh DP-1250VS-HS Drill Press User's Manual
Key Components:
- Control Panel – Houses power switch, RPM controls, and digital readout.
- Emergency Stop Button – Instantly halts machine operation.
- Drill Head – Contains motor, spindle, and gear selector.
- Table – Adjustable height; supports workpiece.
- Column & Gear Rack – Supports vertical movement of table and head.
- Chuck & Spindle – Accepts tooling; MT3/MT4 taper.
- Coolant System – Optional pump for cooling during cutting.
2. Safety
Quick Safety Precautions
- Wear Eye Protection – Safety glasses required; hearing protection recommended.
- Keep Hands Clear – Avoid contact with rotating tooling.
- Secure Workpiece – Clamp securely to prevent movement.
- Avoid Loose Clothing – Tie back hair; remove jewelry.
- Disconnect Power for Maintenance – Unplug before servicing.
- Never Leave Running Machine Unattended – Wait for full stop before walking away.
Safety Checklist
Pre-Operation
- Inspect machine for damage or wear.
- Clear and light work area.
- Check tooling condition and secure installation.
- Wear proper PPE: glasses, hearing protection recommended.
- Remove tools/wrenches from table and chuck area.
- Verify emergency stop and guard switch functionality.
Setup & Use
- Secure material with clamps.
- Adjust table height and lock in place.
- Select appropriate RPM range before starting.
- Use correct tooling for drilling or tapping.
3. Operation Procedure
1. Preparation
- Select and install appropriate drill bit or tapping tool.
- Adjust table height and position for workpiece.
- Lock table and head securely.
- Set spindle speed using gear selector and digital RPM control.
2. Starting the Drill Press
- Stand clear of rotating components.
- Turn on power and allow spindle to reach full speed.
- Monitor RPM readout for correct speed range.
3. Drilling
- Secure workpiece to table with clamps.
- Lower spindle using feed handle in manual or auto mode.
- Apply steady pressure; do not force the tool.
- Retract spindle after completing hole.
4. After Operation
- Wait for spindle to stop completely.
- Turn off power and disconnect if performing maintenance.
- Clean table and remove chips or debris.
4. Maintenance Schedule
Weekly
- Clean drill press surfaces and remove metal chips.
- Inspect tooling and chuck for wear.
- Check guard and limit switch operation.
Monthly
- Lubricate feed handles and gear rack.
- Inspect spindle taper and chuck alignment.
- Verify RPM control and digital readout accuracy.
Quarterly
- Deep clean motor housing and electrical enclosure.
- Inspect belt and gear selector mechanism.
- Review user manual for updates and perform full inspection.