Skip to main content

Baileigh DP-1250VS-HS Drill Press

1. General Info

Purpose:
Designed for high-speed, variable-speed drilling in metal and compatible materials. Ideal for industrial fabrication, maintenance, and precision drilling tasks. Features include digital RPM readout, MT3/MT4 spindle taper, and adjustable table height.

Baileigh DP-1250VS-HS Drill Press User's Manual

Key Components:

  • Control Panel – Houses power switch, RPM controls, and digital readout.
  • Emergency Stop Button – Instantly halts machine operation.
  •  Drill Head – Contains motor, spindle, and gear selector.
  •  Table – Adjustable height; supports workpiece.
  •  Column & Gear Rack – Supports vertical movement of table and head.
  •  Chuck & Spindle – Accepts tooling; MT3/MT4 taper.
  •  Coolant System – Optional pump for cooling during cutting.

2. Safety

Quick Safety Precautions
  • Wear Eye Protection – Safety glasses required; hearing protection recommended.
  • Keep Hands Clear – Avoid contact with rotating tooling.
  • Secure Workpiece – Clamp securely to prevent movement.
  • Avoid Loose Clothing – Tie back hair; remove jewelry.
  • Locate emergency stop.
  • Never Leave Running Machine Unattended – Wait for full stop before walking away.

3. Setup & Use

Preparation
  • Inspect machine for damage or wear.
  • Remove tools/wrenches from table and chuck area.
  • Select and install appropriate drill bit.
  • Adjust table height and position for workpiece.
  • Secure work piece to table using vice, angle vice, clamps, fixture or other working holding. All work pieces should be secured to the table.
  • Lock table and head securely.
  • Use a sacrificial board if drilling through work piece. Do not drill into Drill Press tables.
  • Set spindle speed using digital RPM control. To Find RPM 3.82 x SFM / Diameter of drill.
Operation
  • Keep clear of rotating components.
  • Turn on power and allow spindle to reach full speed.
  • Monitor RPM readout for correct speed range.
  • Lower spindle using feed handle.
  • Apply steady pressure; do not force the tool. Use Peck Drilling as necessary.
  • Retract spindle after completing hole.
Post Operation
  • Turn off power.
  • Wait for spindle to stop completely.
  • Clean table and remove chips or debris.

4. Maintenance Schedule

Weekly
  • Clean drill press surfaces and remove metal chips.
  • Inspect tooling and chuck for wear.
  • Check guard and limit switch operation.
Monthly
  • Lubricate feed handles and gear rack.
  • Inspect spindle taper and chuck alignment.
  • Verify RPM control and digital readout accuracy.
Quarterly
  • Deep clean motor housing and electrical enclosure.
  • Inspect belt and gear selector mechanism.
  • Review user manual for updates and perform full inspection.