Baileigh DP-1250VS-HS Drill Press

1. General Info
Purpose:
Designed for high-speed, variable-speed drilling in metal and compatible materials. Ideal for industrial fabrication, maintenance, and precision drilling tasks. Features include digital RPM readout, MT3/MT4 spindle taper, and adjustable table height.
Baileigh DP-1250VS-HS Drill Press User's Manual
Key Components:

Control Panel – Houses power switch, RPM controls, and digital readout.
Emergency Stop Button – Instantly halts machine operation.
 Drill Head – Contains motor, spindle, and gear selector.
 Table – Adjustable height; supports workpiece.
 Column & Gear Rack – Supports vertical movement of table and head.
 Chuck & Spindle – Accepts tooling; MT3/MT4 taper.
 Coolant System – Optional pump for cooling during cutting.

2. Safety
Quick Safety Precautions

Wear Eye Protection – Safety glasses required; hearing protection recommended.
Keep Hands Clear – Avoid contact with rotating tooling.
Secure Workpiece – Clamp securely to prevent movement.
Avoid Loose Clothing – Tie back hair; remove jewelry.
Locate emergency stop.

Never Leave Running Machine Unattended – Wait for full stop before walking away.

3. Setup & Use
Preparation

Inspect machine for damage or wear.

Remove tools/wrenches from table and chuck area.

Select and install appropriate drill bit.
Adjust table height and position for workpiece.
Secure work piece to table using vice, angle vice, clamps, fixture or other working holding. All work pieces should be secured to the table.

Lock table and head securely.
Use a sacrificial board if drilling through work piece. Do not drill into Drill Press tables.

Set spindle speed using digital RPM control. To Find RPM 3.82 x SFM / Diameter of drill.

Operation

Keep clear of rotating components.
Turn on power and allow spindle to reach full speed.
Monitor RPM readout for correct speed range.
Lower spindle using feed handle.
Apply steady pressure; do not force the tool. Use Peck Drilling as necessary.
Retract spindle after completing hole.

Post Operation

Turn off power.
Wait for spindle to stop completely.

Clean table and remove chips or debris.

4. Maintenance Schedule
Weekly

Clean drill press surfaces and remove metal chips.
Inspect tooling and chuck for wear.
Check guard and limit switch operation.

Monthly

Lubricate feed handles and gear rack.
Inspect spindle taper and chuck alignment.
Verify RPM control and digital readout accuracy.

Quarterly

Deep clean motor housing and electrical enclosure.
Inspect belt and gear selector mechanism.
Review user manual for updates and perform full inspection.