Skip to main content

Baileigh Vertical Bandsaw

Baileigh BSV-24VS Vertical Bandsaw Guide

1. General Info

Purpose:
Designed for industrial-grade vertical cutting of metal, wood, and plastic. Ideal for fabrication shops and metalworking applications. Features variable speed control and blade welding capabilities.

Baileigh Vertical Bandsaw User Manual

Key Components:
  • Blade Guard – Protects user from direct contact with blade.
  • Control Panel – Includes power switch, speed control, and digital readout.
  • Stop Button – Immediately halts blade operation.
  • Table – Provides stable surface for material support.
  • Rip Fence – Adjustable for straight cuts.
  • Blade – Accepts blades from 1/8” to 5/8” wide.
  • Motor Housing – Contains 2HP motor and drive system.
  • Base Mounting Holes – For bench or floor attachment.
  • Blade Welder – Allows blade cutting and rejoining.
  • Dust Collection Port – Connects to vacuum system.

2. Safety

Quick Safety Precautions:
  • Wear Eye Protection – Safety glasses required; face shield recommended.
  • Avoid Loose Clothing – Tie back hair; remove jewelry.
  • Keep Hands Clear – Never reach near or over a moving blade.
  • Avoid awkward hand positions where a sudden slip could cause a hand to move into the blade.
  • Check Blade Guard – Ensure free movement and coverage.
  • Never Leave Running Saw Unattended – Wait for full stop before walking away.
  • Never reach over or behind the blade while it is running.
  • Avoid cutting warped or unstable material.
  • Use proper technique to prevent kickback.
  • Do not operate without blade guard in place.
  • Keep hands and fingers away from blade path.

3. OperationSetup Procedure& Use

1. Preparation:
  • Wear safety glasses and hearing protection.
  • Use the correct blade for your material and cut type. 
  • Select appropriate blade for material and install securely.
  • Ensure the cut-off piece can move freely after cutting to avoid jamming and kickback.
  • Set blade speed using inverter control (85–2200 FPM).
  • Ensure blade guard and fence (if using) are properly positioned.
  • Set the blade guard about 0.25" (6.35mm) above the material and tighten the knob.
  • WearPosition safetythe glasseswork andlamp hearingto protection.light the cut area without interfering with material control.
  • Ensure the work area and table are clear of obstructions.
  • Adjust the table and fence as needed. Keep a push block within reach, avoiding the blade path and cut line. A dry run without power may help.
  • Position the work lamp to light the cut area without interfering with material control.
  • Support both the finished piece and excess material. Ensure both sides of the cut are stable and won’t fall or shift unexpectedly.

4. Starting the Saw:

  • StandPress the start button to the side ofpower the blade path.blade.
  • Turn on the saw and allowAllow blade to reach full speed.
  • Set blade speed using inverter control (85–2200 FPM).
  • Verify speed setting on digital readout.
5. Making Cuts:
  • Press the start button to power the blade. Stop immediately if you hear abnormal sounds or vibrations.
  • Adjust variable speed (B) until the desired speed shows on the display.
  • Place the material on the table.
  • Feed it into the blade with a smooth, steady motion.
  • After the cut, press the red stop button (do not press emergency stop unless in an emergency) and wait for the blade to stop before removing material.
6. After the Cut:
  • Wait for blade to stop completely before removing material.
  • Clean work area.
  • Inspect blade and machine for wear or damage, tell MCSS staff in you notice any defects in the blade.

7. Maintenance Schedule

Weekly:
  • Clean sawdust and metal shavings from vents and moving parts.
  • Check blade for dullness or damage.
  • Inspect power cord and switches.
  • Test emergency stop and blade guard movement.
Monthly:
  • Lubricate blade guides and tensioning mechanisms.
  • Check alignment of rip fence and blade.
  • Inspect weld station and clean contacts.
  • Tighten bolts and fasteners.
Quarterly:
  • Deep clean motor housing and table surface.
  • Inspect inverter and speed control system.
  • Replace blade if performance is reduced.
  • Review user manual for updates or recalls.