Baileigh Vertical Bandsaw

Baileigh BSV-24VS Vertical Bandsaw Guide

1. General Info

Purpose:
Designed for industrial-grade vertical cutting of metal, wood, and plastic. Ideal for fabrication shops and metalworking applications. Features variable speed control and blade welding capabilities.

Baileigh Vertical Bandsaw User Manual

Key Components:

Blade Guard – Protects user from direct contact with blade.

Control Panel – Includes power switch, speed control, and digital readout.

Stop Button – Immediately halts blade operation.

Table – Provides stable surface for material support.

Rip Fence – Adjustable for straight cuts.

Blade – Accepts blades from 1/8” to 5/8” wide.

Motor Housing – Contains 2HP motor and drive system.

Base Mounting Holes – For bench or floor attachment.

Blade Welder – Allows blade cutting and rejoining.

Dust Collection Port – Connects to vacuum system.

2. Safety

Quick Safety Precautions:

Wear Eye Protection – Safety glasses required; face shield recommended.

Keep Hands Clear – Never reach near or over a moving blade.

Avoid ~~Secure~~awkward ~~Workpiece~~hand –positions ~~Use~~where ~~clamps~~a orsudden ~~fence~~slip ~~for~~could ~~stability.~~cause
·a hand to move into the blade.

Avoid Loose Clothing – Tie back hair; remove jewelry.

Check Blade Guard – Ensure free movement and coverage.

Disconnect Power for Maintenance – Always unplug before servicing.

Never Leave Running Saw Unattended – Wait for full stop before walking away.

· ~~Verify Safety Features – Ensure emergency stop and blade guard are functional.~~

3. Operation Procedure

1. Preparation:

Select appropriate blade for material and install securely.

· ~~Adjust blade tension and tracking using control knobs.~~

Set blade speed using inverter control (85–2200 FPM).

Ensure blade guard and fence are properly positioned.

Wear safety glasses and hearing protection.

2. Starting the Saw:

Stand to the side of the blade path.

Turn on the saw and allow blade to reach full speed.

Verify speed setting on digital readout.

3. Making Cuts:

Use rip fence for straight cuts; adjust as needed.

Guide material steadily through blade without forcing.

Use push blocks for small or narrow pieces.

· ~~For internal cuts, use blade shear and welder to thread blade through material.~~

· ~~Monitor blade tracking and adjust if necessary.~~

4. After the Cut:

Wait for blade to stop completely before removing material.

Turn off saw and clean work area.

Inspect blade and machine for wear or damage.

5. Safety Tips:

Never reach over or behind the blade while it is running.

Avoid cutting warped or unstable material.

Use proper technique to prevent kickback.

Do not operate without blade guard in place.

Keep hands and fingers away from blade path.

4. Maintenance Schedule

Weekly:

Clean sawdust and metal shavings from vents and moving parts.

Check blade for dullness or damage.

Inspect power cord and switches.

Test emergency stop and blade guard movement.

Monthly:

Lubricate blade guides and tensioning mechanisms.

Check alignment of rip fence and blade.

Inspect weld station and clean contacts.

Tighten bolts and fasteners.

Quarterly:

Deep clean motor housing and table surface.

Inspect inverter and speed control system.

Replace blade if performance is reduced.

Review user manual for updates or recalls.