Delta B.O.S.S. Bench Oscillating Spindler Sander

1. General Info

Purpose:
Designed for freehand sanding of wood, especially for creating round or organic profiles.

Delta Bench Oscillating Spindle Sander.pdf

Key Components:

• Sanding Guard – Protects user from direct contact with spindle base.
  
• On/off – Controls on/off of machine.
• Table – Provides stable surface for material support.
• Dust Collection Port – Connects to vacuum system.

2. Safety

Quick Safety Precautions:

• Wear Eye Protection – Safety glasses required; face shield recommended.
• Avoid Loose Clothing – Tie back hair; remove jewelry.
• Keep Hands Clear – Never reach near or over a moving spindle.
• Avoid awkward hand positions where a sudden slip could cause a hand to move into the spindle.
  
• Never Leave Running Sander Unattended – Wait for full stop before walking away.
  
• Avoid sanding unstable material.
• Use proper technique to prevent kickback.
  
• Keep hands and fingers away from spindle.

3. Setup & Use

Preparation

• Wear safety glasses and hearing protection.
• Use the correct spindle size for your material. Ask MCSS or Manufacturing Center Staff for assistance otherwise.
  
• Ensure the work area and table are clear of obstructions.
  
• Support both the finished piece and excess material. Ensure both sides of the object are stable and won’t fall or shift unexpectedly.

Operation

• Press the start button to power the spindle.
• Allow spindle to reach full speed.
  
• Stop immediately if you hear abnormal sounds or vibrations.
  
• Place the material on the table.
• Feed it into the spindle with a smooth, steady motion.
  
• Use rubber stick to clean grit of sandpaper to extend longevity

Post Operation

• Clean work area.
• Inspect spindle and machine for wear or damage, tell MCSS or MC staff or if you notice any defects in the spindle. 

4. Maintenance Schedule

Weekly:

• Clean sawdust and metal shavings from vents and moving parts.
• Check spindle for tears or damage.
• Inspect power cord and switches.
  

Monthly:

• Tighten bolts and fasteners.

Quarterly:

• Deep clean motor housing and table surface.
• Inspect inverter and speed control system.
• Replace sandpaper if performance is reduced.
• Review user manual for updates or recalls.