# Drill Press (Baileigh DP-1250VS-HS)

# Baileigh DP-1250VS-HS Drill Press

#### 1. General Info

Purpose:  
Designed for high-speed, variable-speed drilling in metal and compatible materials. Ideal for industrial fabrication, maintenance, and precision drilling tasks. Features include digital RPM readout, MT3/MT4 spindle taper, and adjustable table height.

<p class="callout info">[Baileigh DP-1250VS-HS Drill Press User's Manual](https://itll-wiki.colorado.edu/bookstack/attachments/136)</p>

Key Components:

- Control Panel – Houses power switch, RPM controls, and digital readout.
- Emergency Stop Button – Instantly halts machine operation.
-  Drill Head – Contains motor, spindle, and gear selector.
-  Table – Adjustable height; supports workpiece.
-  Column &amp; Gear Rack – Supports vertical movement of table and head.
-  Chuck &amp; Spindle – Accepts tooling; MT3/MT4 taper.
-  Coolant System – Optional pump for cooling during cutting.

#### 2. Safety

##### Quick Safety Precautions

- Wear Eye Protection – Safety glasses required; hearing protection recommended.
- Keep Hands Clear – Avoid contact with rotating tooling.
- Secure Workpiece – Clamp securely to prevent movement.
- Avoid Loose Clothing – Tie back hair; remove jewelry.
- Locate emergency stop.
- Never Leave Running Machine Unattended – Wait for full stop before walking away.

#### 3. Setup &amp; Use

##### Preparation

- Inspect machine for damage or wear.
- Remove tools/wrenches from table and chuck area.
- Select and install appropriate drill bit.
- Adjust table height and position for workpiece.
- Secure work piece to table using vice, angle vice, clamps, fixture or other working holding. **All work pieces should be secured to the table.**
- Lock table and head securely.
- Use a sacrificial board if drilling through work piece. **Do not drill into Drill Press tables.**
- Set spindle speed using digital RPM control. To Find RPM 3.82 x SFM / Diameter of drill.

##### Operation

- Keep clear of rotating components.
- Turn on power and allow spindle to reach full speed.
- Monitor RPM readout for correct speed range.
- Lower spindle using feed handle.
- Apply steady pressure; do not force the tool. Use Peck Drilling as necessary.
- Retract spindle after completing hole.

##### Post Operation

- Turn off power.
- Wait for spindle to stop completely.
- Clean table and remove chips or debris.

#### 4. Maintenance Schedule

##### Weekly

- Clean drill press surfaces and remove metal chips.
- Inspect tooling and chuck for wear.
- Check guard and limit switch operation.

##### Monthly

- Lubricate feed handles and gear rack.
- Inspect spindle taper and chuck alignment.
- Verify RPM control and digital readout accuracy.

##### Quarterly

- Deep clean motor housing and electrical enclosure.
- Inspect belt and gear selector mechanism.
- Review user manual for updates and perform full inspection.