Drill Press (Baileigh DP-1250VS-HS)

• Baileigh DP-1250VS-HS Drill Press

Baileigh DP-1250VS-HS Drill Press

1. General Info

Purpose:
Designed for high-speed, variable-speed drilling in metal and compatible materials. Ideal for industrial fabrication, maintenance, and precision drilling tasks. Features include digital RPM readout, MT3/MT4 spindle taper, and adjustable table height.

Baileigh DP-1250VS-HS Drill Press User's Manual

Key Components:

• Control Panel – Houses power switch, RPM controls, and digital readout.
• Emergency Stop Button – Instantly halts machine operation.
•  Drill Head – Contains motor, spindle, and gear selector.
•  Table – Adjustable height; supports workpiece.
•  Column & Gear Rack – Supports vertical movement of table and head.
•  Chuck & Spindle – Accepts tooling; MT3/MT4 taper.
•  Coolant System – Optional pump for cooling during cutting.

2. Safety

Quick Safety Precautions

• Wear Eye Protection – Safety glasses required; hearing protection recommended.
• Keep Hands Clear – Avoid contact with rotating tooling.
• Secure Workpiece – Clamp securely to prevent movement.
• Avoid Loose Clothing – Tie back hair; remove jewelry.
• Locate emergency stop.
  
• Never Leave Running Machine Unattended – Wait for full stop before walking away.

3. Setup & Use

Preparation

• Inspect machine for damage or wear.
  
• Remove tools/wrenches from table and chuck area.
  
• Select and install appropriate drill bit.
• Adjust table height and position for workpiece.
• Secure work piece to table using vice, angle vice, clamps, fixture or other working holding. All work pieces should be secured to the table.
  
• Lock table and head securely.
• Use a sacrificial board if drilling through work piece. Do not drill into Drill Press tables.
  
• Set spindle speed using digital RPM control. To Find RPM 3.82 x SFM / Diameter of drill.

Operation

• Keep clear of rotating components.
• Turn on power and allow spindle to reach full speed.
• Monitor RPM readout for correct speed range.
• Lower spindle using feed handle.
• Apply steady pressure; do not force the tool. Use Peck Drilling as necessary.
• Retract spindle after completing hole.

Post Operation

• Turn off power.
• Wait for spindle to stop completely.
  
• Clean table and remove chips or debris.

4. Maintenance Schedule

Weekly

• Clean drill press surfaces and remove metal chips.
• Inspect tooling and chuck for wear.
• Check guard and limit switch operation.

Monthly

• Lubricate feed handles and gear rack.
• Inspect spindle taper and chuck alignment.
• Verify RPM control and digital readout accuracy.

Quarterly

• Deep clean motor housing and electrical enclosure.
• Inspect belt and gear selector mechanism.
• Review user manual for updates and perform full inspection.